sinter strength meaning in Chinese
烧结矿强度
Examples
- Influence of w on sinter strength and sintering process of vanadium - titanium magnetite
钛烧结矿强度和烧结过程的影响 - Some tests for liangang sinter adding bos slag have be done in the laboratory and plant trial . the results show that in the range of bos slag percentage , from 0 % to 8 % , with the increase of bos slag percentage , the sinter speed has been lower , but the sinter strength and productivity of sinter product have been higher , the sinter productivity will be the maximum when bos slag percentage is 4 % ; the siner reducibility has been improved , the normal operation of bof will not be effected anymore because of the circulation of p form bos slag
对烧结矿配加转炉钢渣进行了实验室研究和工业试验，在钢渣配比0 % 8 %的范围内进行的研究表明：随着钢渣配比的增加，烧结速度稍有下降，烧结矿强度、烧结成品率均有所提高，利用系数在4 %左右时达到最大值；烧结矿还原性得到改善；钢渣中带入的p的循环富集不会影响炼钢的现行操作。 - Abstract : experiments indicated that under tanggang material conditions and at the basicity range of 1 . 4 1 . 7 , the sinter tumbler strength and reduction desintegration properties were worsen as australian fine ores added ; but at the basicity range of 0 . 4 0 . 6 , the sinter strength can improved with both adding of indian fine ores or australian fine ores
文摘:试验表明：在唐钢原料条件下,碱度1 . 4 1 . 7范围内,配加澳粉矿使烧结矿强度和低温还原粉化性能下降,印度粉矿影响不明显;在碱度0 . 4 0 . 6范围内,配加印度粉矿和澳粉矿都有利于烧结矿强度的提高。